Question 1

What is the process for properly cleaning and descaling the coffee grinder attachment on my KitchenAid 702ER?

Accepted Answer

To clean and descale your KitchenAid 702ER coffee grinder attachment, follow these steps:
1. Unplug the appliance from the power source.
2. Remove the hopper and burr assembly by pressing the red button on the top of the grinder and lifting it upwards. Be careful not to lose any burr adjustment settings during this process.
3. Remove the burrs from the hopper and rinse them under warm running water. Use a small brush or an old toothbrush to gently clean any coffee grounds or debris stuck in the grooves. Avoid using harsh detergents or abrasive materials as they can damage the burrs.
4. Clean the hopper with warm, soapy water and a soft sponge or cloth. Rinse it thoroughly and dry it before reassembling the grinder.
5. Descaling: If mineral buildup is present in the grinder, you will need to descale it using a descaling solution. Fill the hopper with 16oz (approximately 500ml) of water and add an appropriate amount of descaling solution according to the manufacturer's instructions. Run the grinder on a coarse setting for several minutes until all the water has passed through. Repeat this process if needed, then rinse the hopper thoroughly with clean water several times to remove any remaining descaling solution.
6. Once the burrs and hopper are cleaned and descaled, reassemble the grinder by reversing the disassembly process. Plug in the appliance and let it run for a minute or two on a coarse setting to ensure that any remaining water or debris has been expelled before using it again.
Remember, regular cleaning and descaling will help prolong the life of your coffee grinder attachment and maintain consistent coffee grinding quality.

Question 2

How do I adjust the grind size on my KitchenAid 702ER coffee grinder?

Accepted Answer

To adjust the grind size on your KitchenAid 702ER coffee grinder, follow these steps:
1. Ensure that the machine is unplugged from the power source and the hopper is empty of coffee grounds. Locate the grind adjustment ring at the bottom of the grinder. This ring controls the size of the ground coffee particles. Rotate the ring to your desired grind size. The coarser grinds will be found towards the front of the machine, while finer grinds are located towards the back. Once you have selected your preferred grind size, secure the ring in place by tightening the adjustment knob on top of the machine. Plug in the machine and follow the normal brewing process to ensure that the grinder is working correctly with the new setting. Note: It's essential to clean the grinding chamber after changing the grind size to avoid any cross-contamination between different grind sizes.

Question 3

How do I properly clean and maintain the burr grinder on my KitchenAid 702ER coffee grinder to ensure optimal performance and prevent damage over time?

Accepted Answer

To keep your KitchenAid 702ER coffee grinder in top condition and ensure optimal performance, it's essential to clean and maintain the burr grinder regularly. Here are some steps you can follow:

1. Unplug the grinder: Before starting any cleaning or maintenance procedures, make sure that the grinder is unplugged from the power source. This will prevent any accidents and ensure your safety during the process. Disassemble the grinder: Remove the hopper, the burr grinders, and the grounds container from the machine. Take out the upper burr grinder and wash it under running water to remove any residual coffee grounds. Use a soft brush to clean any hard-to-reach areas. Clean the lower burr: The lower burr cannot be removed, but you can use a small brush or toothbrush to clean any debris from its teeth. Be gentle not to damage the burr's delicate surface. Wash the hopper and grounds container: Use warm water and dish soap to wash both the hopper and the grounds container. Rinse them thoroughly with water, then let them air dry before reinstalling them on the grinder. Reassemble the grinder: After cleaning all components, reinstall them on the machine, making sure that they are securely fitted. Lubricate the burrs: To prevent rust and ensure smooth grinding, apply a few drops of food-grade oil (such as mineral oil) onto the burr's teeth. Rotate the upper and lower burrs to spread the oil evenly. Store the grinder properly: After cleaning and maintaining your KitchenAid 702ER coffee grinder, make sure that you store it in a dry place, away from any moisture or humidity. This will prevent rusting of the burrs and prolong their lifespan. By following these steps regularly, you can ensure that your KitchenAid 702ER coffee grinder is clean, well-maintained, and operates optimally for a long time.

Question 4

How do I properly use the burr grinder attachment with my KitchenAid 702ER coffee grinder for optimal coffee flavor and consistency?

Accepted Answer

To ensure optimal coffee flavor and consistency when using the burr grinder attachment with your KitchenAid 702ER coffee grinder, follow these steps:

1. Start by ensuring that the grinder is clean and free of any leftover grounds or oils from previous uses. This will help prevent cross-contamination and ensure accurate grinding results. Next, select the appropriate grind setting for your specific coffee type. KitchenAid's burr grinder has a variety of settings, including fine, medium, and coarse. For espresso, use the finest grind size, while drip coffee typically requires a medium grind size. Measure out the desired amount of coffee beans, making sure to use freshly roasted beans for the best flavor. Over-roasting or stale beans can affect the taste and aroma of your coffee. Place the beans into the grinding chamber, ensuring that they are evenly distributed. Avoid overfilling the chamber, as this can cause uneven grinding results. Securely attach the grinder lid to prevent any spills or mess during the grinding process. Turn on the grinder and allow it to run until you have achieved the desired amount of grounds. The speed and duration of the grinding process will depend on the selected grind setting and the quantity of beans being ground. Once the grinding process is complete, remove the container from the grinder and use the freshly ground coffee immediately for optimal flavor and consistency. Finally, be sure to clean the burr grinder attachment thoroughly after each use to prevent buildup and ensure the longevity of the grinder. KitchenAid recommends cleaning the attachment with a soft-bristled brush and a small amount of dish soap. Rinse the attachment thoroughly and dry it completely before storing it. By following these steps, you can achieve optimal coffee flavor and consistency using your KitchenAid 702ER coffee grinder with the burr grinder attachment.

Product name	702ER
Type	Electric Grinder
Grinding Mechanism	Grind
Capacity	200 g
Rotation Speed	450 rpm
Effect	240 W
Features	Adjustable Grinding, Espresso
Height	249 mm
Weight	5.7 kg

Product name	702ER
Product type	Electric Grinder
Grinding Mechanism	Grind
Capacity	200 g
Rotation Speed	450 rpm
Effect	240 W
Features	Adjustable Grinding, Espresso
Height	249 mm
Weight	5.7 kg

Kitchenaid 702ER